HVAC Services In Edmond, OK

Technician arrived on site and installed the Jenn air kitchen vent for the customers vent hood 6 inch hard pipe going out to an exhaust out the roof.

Technician arrived on site to perform routine heating maintenance tuneup, checking over all electrical, components, including, but not limited to blower motors, inducer motors, safeties, temperature, limit switches, gas valve, venting ductwork, and an extensive carbon monoxide test to prevent any dangerous gases being admitted into the home

Technician arrived on site to perform a routine safety heater inspection checking all over all electrical components checking over all safety switches and temperature limit switches checking over all venting issues doing an extensive carbon monoxide test to ensure no dangerous gases are being admitted into the home. system is working correctly in heat mode going to get some recommendations on some preventative parts to prevent the heater from shutting down this winter season.

Arrived on site to perform a two system routine, safety inspection, checking over all electrical motors, inducer motors, limit switches, flame sensors, igniters, and an extensive carbon monoxide test to ensure the safety and efficiency of our customers home both systems are under two years old, so didn’t find anything that would hinder the safety of his equipmentthese winter months

No cooling service call on an Amana unit. The unit wasn't coming on. The float switch was tripped due to the condensation line being unleveled causing water to back flow. Installed a new line and everything was back up and running.

Arrived on location for no heat call found it to be a fault in the basic comfort control system diagnosed it to be an electrical issue causing the thermostat not to work in heat mode. Only replacing thermostat to fix the issue that we are having with this customer’s comfort.

I was called to a customer's home to diagnose a problem with their Lennox air handling unit. After thoroughly inspecting the system, I discovered that the constant fan motor running was caused by a stuck switch in the heat accessory kit. I provided the customer with several options for repair, including a bandaid fix, a premium repair solution, and a temporary solution to keep the system operable until the repair could be made.

1. **Duct Cleaning**: This involves removing dust, debris, and contaminants from the ductwork of your heating, ventilation, and air conditioning (HVAC) system. Over time, ducts can accumulate a variety of particles, including dust, allergens, and mold, which can affect air quality and system efficiency. Professional duct cleaning typically includes: - Inspection of the ducts - Use of specialized tools to dislodge contaminants - High-powered vacuum systems to remove debris 2. **Sanitizing**: After cleaning, sanitizing the ducts helps eliminate any remaining bacteria, mold, or allergens. This process often involves applying a disinfectant or antimicrobial solution to the duct surfaces. Sanitizing can help improve air quality and reduce the risk of health issues related to poor indoor air quality.

I am an HVAC service technician, and I recently completed a Fall safety heating inspection on a system carrier 80% furnace. The inspection involved verifying all venting to be correct, ensuring the proper sequence of operation of the unit without interruptions, inspecting the unit for any visible damage on the heat exchanger, and testing the unit for carbon monoxide levels. I noted some issues with the customer's unit and documented

Technician arrived on site to perform at routine single system. Heat heating safety inspection checked all electrical components safety devices temperature limit switches amp draws on the motors and CO test to protect the family from dangerous gases. System is running efficiently and safely for our customer

so are we living customer had some ongoing issues with their master bathroom during the remodel they noticed that all of their emergency shut offs were leaking we came in and replaced all of their emergency shut offs and installed a new shower valve. taking care of customers the same day is our number one priority

we were here at this customer's house diagnosing a gas fireplace. this family would like to enjoy a warm fire for the holiday season this year

Technician arrived on site to do a routine heating safety inspection on a single zone system electric heat only checked over all electrical components motors temperature limit switches safety devices capacitors check ductwork kindliness of system found system to be safe and efficient this winter season

Today we preformed a Duct cleaning and sanitizing which are both vital for maintaining indoor air quality. **Duct Cleaning** involves: - Removing dust, debris, and allergens from ductwork through inspection, vacuuming, and brush cleaning. **Sanitizing** focuses on: - Applying safe sanitizers to eliminate bacteria and pathogens after cleaning. **Benefits** include: - Improved air quality, enhanced energy efficiency, and better health by reducing allergens and pollutants.

I am an HVAC contractor technician, and I recently completed a job that involved a system fall safety tune-up inspection on a Lennox elite 95% efficient unit operating downstairs. The unit was three years old and had been tested for all components within the system. I also inspected the unit for any signs of natural gas leaks and checked for carbon monoxide. The inspection was thorough, and I found no issues. Upstairs unit Goodman 96% venting disconnected, completed upstairs with 0ppm carbon monoxide

Arrived on site to perform a two system heating safety inspection checked all electrical components checked all safety devices associated with the natural gas checked all temperature limit switches. Check the condition of the ductwork making sure the system will run efficiently and safely for our customer this winter season.

Arrived to run a routine heater safety inspection, checking over the electrical motors, safety devices, temperature limit switches, and CO detection. To ensure the furnace is working safe and efficient for our customers this winter season

performed fall safety inspection on two natural gas heaters one Armstrong brand and one American Standard during these inspections we check carbon monoxide we check for gas leaks and we check for any other safety issues that could be produced during the cold Winters

Arrived on site to do a routine heating safety inspection, checked the furnace for any issues in the safety or operations of the system. Checked over the motors, safety’s, temperature limits, and CO detection. X2 furnace tune up. Found the furnaces to be safe this winter season.

No cooling service call tonight, and the customer let someone wire their thermostat and it was wired wrong. A simple fix and they were good to go.

Last year this customer's Gas furnace safety check didn't go so well. The heat exchanger had a crack in it and the carbon monoxide levels were deadly high. Since then the unit has been replaced and this year all was well.

Today in Oklahoma City, I had a routine Gas furnace safety test. Making sure everything ran properly I found this corroded ignitor that was on its way out.

Arrived on site to do a single system, routine heating inspection in Edmond Oklahoma. System is a 1 heat system. Electrical heat only. Checked all the motors, switches, temperature limit switches, and condition of the electrical components inside the system.this home gets the green light for safe warm winter comfort.

Completed fall safety Heating inspection on 90% efficiency, system safeties and controls checked out, discovered ignition system wearing out , and flame sensor , when inspecting heat exchanger noticed some areas of concern, tested carbon monoxide levels in home and has 5ppm on air stream , when complete went over system inspection with customer.

Arrived on site, to look into a error code, the LG mi I split was throwing a error code, checked over all electrical components to ensure they were functioning properly. Then reset the 240V power source. System is working correctly