Adding a mini-split in your home? We’ve listed in this blog all the essential things you need to know about ductless A/C installation in Moore, OK.
Important Guidelines for Split AC Installation
Mini-splits are a popular option, especially for homeowners or business owners that need to cool a specific space. It allows controlled cooling, and most models nowadays are made efficient, so you don’t have to spend hundreds or thousands on your energy bills.
If you choose mini-split for your A/C installation in Moore, OK, you will likely find this blog helpful. Whether you have hired a licensed A/C installer or are knowledgeable and skilled enough to handle the installation, here are a few guidelines to ensure the process will go smoothly and properly.
Find the best location for indoor unit installation.
Mini-splits come in two separate units – an indoor unit and an outdoor unit. The indoor unit houses the evaporator, while the outdoor unit contains the compressor. It’s crucial to find a suitable location for both units, but the indoor unit is where you’ll have more flexibility.
The best place for the indoor unit is often high on a wall near the center of the room or space that needs cooling, away from direct sunlight. If you’re installing multiple indoor units, be sure to stagger them so that each one has enough space to function properly. To make sure all the units are installed in the best location, let an expert in A/C installation in Moore, OK handle the job.
Ensure the wall can support the indoor unit’s weight.
The mini-split indoor unit is typically mounted on the wall. While the system is typically lightweight, it is still crucial to test the strength of the walls where you will install the system. You wouldn’t want your cooling equipment to fall off suddenly and your walls to crumble.
Use a stud finder to locate the wall’s framing members and make sure they’re strong enough to hold the indoor unit’s weight. You should also use screws that are long enough to penetrate into the wall framing.
Ensure proper placement of the outdoor unit.
The outdoor unit of a mini-split must be placed on level ground that can support its weight. The surface should be flat and rigid. It’s essential to have at least 2 feet of clearance on all sides of the unit to ensure proper airflow. The outdoor compressor also emits heat, so it’s important not to place it near any windows or doors.
Pay attention to spacing.
The further the distance between the indoor and outdoor units, the longer the refrigerant lines will have to be. Longer lines result in more heat loss, reducing your system’s efficiency. For this reason, it’s important to place the indoor and outdoor units as close together as possible.
An experienced and skilled A/C installation in Moore, OK knows exactly how much space your unit needs to function properly.
Make sure there’s enough access to the outdoor unit.
The outdoor unit of a mini-split system needs to be accessible for maintenance purposes. Be sure to place it in an area where you or an A/C maintenance technician can easily get to it when necessary.
Choose the right size system.
When choosing a mini-split system, it’s important to choose one that is the right size for your needs. An undersized system will have to work harder to cool your space, which will lead to higher energy bills and reduced efficiency. An oversized system will cool your space too quickly, leading to wasted energy and potential moisture problems.
If you want to get the best mini-split for your bucks, you can always count on experts in A/C installation in Moore, OK for assistance.
Pay attention to the distance between the indoor and the outdoor unit
The further the distance between the indoor and outdoor units, the longer the refrigerant lines will have to be. Longer lines result in more heat loss, which can reduce your system’s efficiency. For this reason, it’s important to place the indoor and outdoor units as close together as possible.
By following these guidelines, you can be sure that your mini-split installation will go smoothly and result in a system that is both efficient and long-lasting.
Why Proper A/C Installation in Moore, OK Is Important
Mini-split installation may sound easy – there’s no ductwork involved. But there are these little details you have to get right to ensure the installation is done right. That is why we recommend letting someone who has been installing air conditioning systems for years handle yours. Otherwise, you might end up suffering the consequences of an improperly installed mini-split:
If the mini-split isn’t installed level, or if the outdoor unit isn’t installed far enough away from the indoor unit, then you won’t get proper airflow. This will lead to poor cooling (or heating) performance and could cause your system to break down prematurely.
High Energy Bills
Again, improper installation can lead to poor airflow and less efficient operation. This means your system will have to work harder to maintain the temperature you want, leading to higher energy bills.
Shortened System Lifespan
If your system isn’t operating efficiently, it will wear out faster. In addition, if any of the components are not installed properly, they may break down sooner than they should. This can shorten the lifespan of your mini-split significantly.
Inadequate Warranty Coverage
Most manufacturers void the warranty if the system isn’t installed by a certified professional. So, if something does go wrong, you may not be able to get it fixed under warranty.
Poor Indoor Air Quality
If there are any leaks in the ductwork or around the indoor unit, it could pull dirty air into the system and circulate it throughout your home. This can lead to poor indoor air quality and potentially cause health problems for you and your family.
Unsafe Electrical Connection
Improper wiring is a significant fire hazard. If the electrical connections are not installed correctly, it could start a fire that could damage your home and put your family at risk.
As you can see, there are a lot of potential problems that can arise from an improperly installed mini-split. That is why we always recommend having a professional handle the installation process. Not only will it ensure the job is done right, but it will also give you peace of mind knowing that your family is safe and your system is covered by warranty.
Why Choose A Mini-split For Your A/C Installation Project in Moore, OK?
If you’re planning to install a new air conditioning unit, you may want to consider a mini-split. It is often referred to as a ductless air conditioning system because it functions even without ductwork.
A properly installed mini-split will let you enjoy a chilled interior environment and more! Here are a few of the benefits of this air conditioning system.
Versatile Mounting Options
Mini-splits are pretty versatile. You can mount it on the wall, ceiling, or floor – you decide which is best for you and your property. The ductless Air Conditioning installation in Moore, OK is pretty straightforward.
Mini-splits are incredibly energy efficient, using up to 30% less energy than traditional central air conditioners. Modern models are also packed with amazing features that let you save more money and enjoy improved comfort.
Better Indoor Air Quality
Mini-splits don’t rely on ductwork, so there is no risk of the dust and allergens accumulating in ducts being circulated through your home.
With a mini-split system, you can cool specific areas of your home as needed, rather than cooling (or heating) the entire space. The zoned cooling ability can save you money on your energy bills.
Mini-splits operate very quietly, so you can enjoy a comfortable environment without the noise of a traditional air conditioner.
With proper maintenance, a mini-split air conditioner can last for many years, making it a wise investment for your home comfort.
Increased Home Value
Because they improve the comfort and aesthetic of your home, adding mini-splits can increase its resale value.
No Ductwork Required
One of the most significant advantages of a mini-split system is that it doesn’t require any ductwork, making it ideal for homes without existing ductwork or have difficult-to-reach spaces. A ductless A/C installation in Moore, OK is also less costly than a central A/C that needs to be installed from scratch.
Reduced Carbon Footprint
Since mini-splits are so energy efficient, they can help you reduce your carbon footprint and do your part to protect the environment.
Mini-split air conditioners are available in a variety of styles, so you can find one that fits your home’s décor. And because they’re wall-mounted or ceiling-mounted, they take up very little space.
A mini-split air conditioner is an excellent option if you’re looking for an efficient and versatile way to cool your home. If you’re ready to schedule ductless A/C installation in Moore, OK, please do not hesitate to contact our team at 405-283-3977.